Cut you fabric 5 1/2" by 8" and turn the 5 1/2" edges in a full 1/4 of an inch. I know the photo says 1/8 to 1/4 but make it the full 1/4". Stitch along the folded edge. I used regular thread on top and invisible thread in the bobbin. This way the invisible thread is on the right side of the fabric and the bobbin thread is on the inside and not seen. You won't have to change thread colors every time you change the fabric color. If you are making several at a time this really helps with the chain pieceing.
Next, pressed the sewn edges. (these were not pressed before I took this photo and it really makes a difference in the look of the finished product.)
Fold end edges into the center and overlap the edges a full 1/4". Pin in place and double stitch up seam sides. Stay close to the edge on the first row of stitches so that you have room for the second row. Use a small stitch for strength. I used a double needle for the double stitch to save some time.
Turn it right side out and there's your tissue holder!
No comments:
Post a Comment